TickNext

Build a PC, step by step

11 steps. Follow them here, or run them in TickNext one step at a time, with every command ready to copy and help right inside the step.

Run this in TickNext →
  1. Ground yourself and unbox partsWork on a hard surface. Touch a metal part of the case now and then to discharge static.
  2. Fit the CPU into the motherboardMatch the triangles, lower it in, close the lever.
  3. Install the M.2 SSDSlide it into the M.2 slot at an angle, press it down and fix it with the small screw.
  4. Install the RAMCheck the manual for which slots to use first (often 2 and 4). Press until both clips click.
  5. Fit the CPU coolerUse the thermal paste that came on it or a pea-sized dot. Plug its fan into the **CPU_FAN** header.
  6. Mount the motherboard in the caseFit the I/O shield if it's separate, then screw the board onto the standoffs.
  7. Install the power supply
  8. Install the graphics cardRemove the slot covers, push it into the top long slot until it clicks, and screw it in.
  9. Connect the cablesMotherboard, CPU, graphics card, then front-panel cables.
  10. First power onPlug in a monitor **to the graphics card**, then press power. If you see the BIOS screen, it works.
  11. Install the operating systemBoot from a USB installer and follow the setup.
Run this in TickNext →
More guidesMake a website with Vite, step by stepStart a Python project, step by stepPut a project on GitHub, step by stepDeploy a Next.js app to Vercel, step by stepConnect a domain to Vercel, step by step

© Notable FZ-LLC · ticknext.app · All guides